Are you ready to take your little one’s playtime to the next level? Look no further! Our step-by-step guide will show you how to revamp your Step 2 Hot Wheels table into a thrilling track that will entertain your little one for hours. You can create a fantastic multi-vehicle toy experience at home with just a few materials and a little creativity.
As we have previously mentioned many times before, Xander has a strong fascination with anything that has wheels. Not surprisingly, this epic toy hack did not disappoint him. He can’t get enough of it! Additionally, Melianna also enjoys playing with it, which is great because they can have fun together with this upgraded toy. Are you excited to see how Edgar transformed the table? Let’s get started and witness the excitement unfold!
What You’ll Need
- Step 2 Hot Wheels table or anything comparable.
- Styrofoam blocks. Edgar used this specific foam. He had it lying around. Any foam will work; however, he preferred this one because it is durable and does not make a mess when cut. Floral foam blocks would also work and are much less expensive; however, just be sure to cover the entire ramp and platform structures with felt to help prevent messes when the table is ready for play.
- Cardboard. Instead of using typical cardboard, Edgar opted for cardboard edge protectors he had saved from a previous appliance purchase. While they are available for purchase, they tend to be expensive. A more affordable and convenient alternative is to use a vinyl corner bead. Edgar also used this material in his DIY magnetic ramp wall, and it is easy to work with.
- Pex pipe
- 6 Protein drink cartons (or anything you have would work). Edgar used a combination of a generic brand and muscle milk shakes cartons, which are readily available. As we consume these shakes daily, he did not have to go out of his way to purchase them. Use what works for you and is convenient. Additionally, he made sure to clean out the cartons and securely seal the caps.
- Felt (optional)
- Marker
- Duct tape
- Glue. Edgar used a glue gun.
- X-acto knife or sharp knife
- Decals/stickers (optional)
Epic Step 2 Hot Wheels Table Hack Process
Start by placing your foam pieces into the spaces of the Hot Wheels table as pictured to ensure no obstructions from the tabletop lying flat. Edgar began with the large piece first. Feel free to use the exact locations as Edgar or other areas you prefer. These foram pieces will function as ramps and a small platform.
After deciding where to place the foam pieces, cut them accordingly to level them with the tabletop. Edgar angled two of them to create ramps. Then cover the cut foam pieces with duct tape and place the lid on top to connect them. The duct tape is temporary until you finalize the layout and glue them to the table for a permanent hold. Remember to flip the tabletop throughout the process to ensure the accessories fit correctly in the dead space.
Next, if you’d like to make a finger skateboard grind bar, insert the pex pipe ends into the foam pieces arranged like Edgar’s.
Next, make the bigger tabletop hill by using protein shake bottles. Edgar utilized a glue gun to attach six bottles, four at the bottom and two on top. Then, place this hill over the deepest part of the track as it is too large to fit anywhere else. Use tape to secure it in place.
Next, grab the cardboard edge piece or vinyl corner bead to create a long narrow ramp. Position it as desired, ensuring it doesn’t interfere with the tabletop’s level. Then use tape to secure it in place.
Next, use the pex pipe to create a rough road surface. Edgar cut the material into pieces of varying sizes, ranging from 3-5 inches, and then fastened them together using a lengthy strip of duct tape.
Next, create the multi-mini ramps. Edgar utilized the cardboard edge protector and sliced it into four smaller sections, measuring approximately three inches each. Likewise, the vinyl corner bead can be a suitable substitute for this component.
After adding the features to the table and securing them with tape, confirm that they do not affect the tabletop level. Mark the location of each element on the table with a marker to ensure accuracy when removing the tape and gluing the features to the table. Then, replace the duct tape with glue for each item.
If you are using felt, you can glue it to the foam surfaces, pex piping, and protein shake bottles. Additionally, Edgar used a piece of cork on the protein bottles’ surface to make the felt lay on top and to eliminate gaps. However, using cork is optional, and any durable, flat surface will work.
Finally, it is time to decorate the epically upgraded hot wheels table. Edgar chose monster truck decals left over from a gift we had given Xander. The sky’s the limit! Encourage your kiddo to help out and have fun with it!
For a clear and detailed guide, you can watch Edgar’s DIY video which provides visual step-by-step instructions.
Final Thoughts on [Step 2] Hot Wheels Table Hack
As can be seen in the video, this Step 2 Hot Wheels table hack is not only epic but also budget-friendly, allowing you to create an exciting toy experience for your child without breaking the bank. By following our step-by-step process outlined in this DIY guide, you can transform a simple table into a thrilling track filled with ramps, jumps, and obstacles that will keep your little one engaged and entertained.
Additionally, involving your child in the decorating process with decals and stickers adds a personalized touch and endless fun. So, are you ready to take your little one’s playtime to the next level?
We hope you enjoyed this idea and found these instructions helpful. Please share your thoughts, questions, or experience with the Step 2 Hot Wheels table hack in the comment section below. We would love to hear your feedback! Interested in more DIY car toys? Take a look at Edgar’s Car Mountain and Car-Themed Busy Board for additional fun and affordable options! Also, be sure to check out Super Simple DIY Dad for more exciting and imaginative ideas!
